整机结构 · 织物运行 · 机构传动

剪毛整机：牵引、支呢剪切、清刷与出布

设备与局部保存SVG
剪毛整机：牵引、支呢剪切、清刷与出布完整进出布侧视：牵引控制布速，支呢架托起绒面，刀组只剪绒毛而不切断基布 剪毛整机：牵引、支呢剪切、清刷与出布完整进出布侧视：牵引控制布速，支呢架托起绒面，刀组只剪绒毛而不切断基布① 连续进布展布、检测与牵引控制张力② 刀台支承圆滑支呢架确定基布位置③ 旋转剪切螺旋刀与固定平刀共同剪毛④ 清刷出布短绒屑进入吸尘通道过滤与抽尘进布与检测牵引出布剪毛刀组支呢架剪后清刷布面展开 · 与主图同一输送量基布沿支呢架圆滑包绕，刀口位于绒毛层；前后牵引、刷毛和吸尘连成完整加工过程。{"model": "螺旋刀平刀式剪毛机", "summary": "进布检测与牵引、圆滑支呢架、旋转螺旋刀与固定平刀、出布清刷和吸尘组成完整加工过程。", "sources": ["", "", "https://www.danti.it/technology/technology-of-shearing/", "https://www.laferspa.com/en/shearing-machines-knitted-woven-fabrics"], "evidenceUsed": ["Danti原厂剪毛机理：螺旋刀与固定平刀在剪切点接触，刀轮后方吸尘箱抽走纤维，剪毛高度含基布厚度", "Lafer CMI100原厂页面提供单刀头整机与布路图；当前通用五导辊线路未宣称等同CMI100", ""], "geometry": "通用剪毛整机教学侧视，不标DP7具体型号或宣称其内部尺寸完全复刻。", "checks": ["支呢架接触半径20与织物中线相切，基布不进刀体", "剪切线高于基布17个绘图单位", "刀尖与固定平刀在同一剪切位置", "绒毛根部随相同材料坐标移动", "前后牵引及接取导辊均按接触速度换算角速度", "剪切点经刀轮背侧示意吸尘通路接入现有罩与主管；不宣称原厂管径及定位", "清刷与吸尘罩连接连续", "主体实体遮挡其内部纤维", "原始校徽随同一输送时钟"]}浙江纺织服装职业技术学院 · ZJFF · 浙纺服院；布面校徽来自用户提供的原始SVG。{"revision": "20261024-point-trajectory", "pointNodes": 470, "extraKnots": 18488, "tolerance": 0.06}{"revision":"20261023-continuous-material-lossless","equivalence":"exact decimal cross-products at every original time knot; no approximate simplification","originalAnimations":512,"originalKeyframes":226683,"retainedKeyframes":164880,"maximumComponentError":{"cx":0,"cy":0,"d":0,"translate":0},"translatedPaths":0,"translationResidual":0,"factoredTransformAnimations":0,"retainedAnimations":512}
螺旋刀、平刀与支呢架